中文版　English

Homepage Company profile Technical articles Papers Products & services Question contact us

Position：首页 > Technical articles > Theoretical research The structure of Fe-Cr-B coatings obtained using selected methods of thermal spraying 2012-09-26 The influence of heat treatment on the microstructural, mechanical and corrosion behaviour of cold sprayed SS 316L coatings 2012-09-25 Research of Phase Structure of Multilayered Vacuum-Plasma Coatings of System Ti–C–Si 2012-09-24 Sintering Behaviour of Thermal Barrier Coatings (TBCs) 2012-09-23 Laser-induced surface acoustic waves for evaluation of elastic stiffness of plasma sprayed materials 2012-09-21 An Overview of Characterisations and High Temperature Behaviour of Thermal Spray NiCr Coatings 2012-09-19 The continuous increase of the turbine inlet temperature in gas turbines necessitates new thermal barrier coatings TBCs with enhanced temperature capability and longer lifetime. This paper reviews our 2012-09-19 In situ formation of TiC particulate composite layer on cast iron by laser alloying of thermal sprayed titanium coating 2012-09-17 Micro-Metallurgy of Splats: Theory, Computer Simulation and Experiment 2012-09-15 Solidification behaviour of Al–7% Si–0.3% Mg during rotary spray forming 2012-09-15 IN-FLIGHT BEHAVIOUR OF DENSE AND HOLLOW PARTICLES DURING PLASMA SPRAYING: PART I A NUMERICAL MODEL 2012-09-14 Study of Ni-Tio2 nanocomposite coating prepared by electrochemical deposition 2012-09-04 NATURE OF THE CORROSION PROBLEM 2012-07-03 HISTORY OF COATING SYSTEMS 2012-07-03 Spalling 2012-07-03 MECHANICAL SPALLING 2012-07-03 Thermal cycling behavior of La_2Ce_2O_7/8YSZ double-ceramic-layer thermal barrier coatings prepared by atmospheric plasma spraying 2012-07-03 Atmospheric plasma sprayed thermal barrier coatings with high segmentation crack densities: Spraying process, microstructure and thermal cycling behavior 2012-07-03 Finely grained nanometric and submicrometric coatings by thermal spraying: A review 2012-07-03 Alumina coatings obtained by thermal spraying and plasma anodising—A comparison 2012-07-03 Influence of Particle Initial Temperature on High Velocity Impact Process in Cold Spraying 2012-07-03 Fabrication of finely structured silicon-supported SOFC with anode deposited by multi-phase plasma spraying 2012-07-03 Quantitative evaluation of the decarburization and microstructure evolution of WC–Co during plasma spraying 2012-07-03 Effect of substrate surface temperature on the microstructure and ionic conductivity of lanthanum silicate coatings deposited by plasma spraying 2012-07-03 An elastic-perfectly plastic model for simulating an aluminum particle behavior during plasma thermal spraying using the finite element method 2012-07-03 页次：7/8 每页25 总数178    首页  上一页  下一页  尾页    转到:第 1 页第 2 页第 3 页第 4 页第 5 页第 6 页第 7 页第 8 页

Information Update Heat Treatment Effects on the Tribological P Interface diffusion of the nanostructured TB Top coat phase stability Thermoelectric properties of magnesium silic Tantalum Oxidation in Steam Atmosphere Characterization of the Wear Scar about Cr3C Thermal Cycle Testing of TBCs NiCoCrAlY Coating Properties as a Function o Effect of HVOF Processing Parameters on the Effect of grinding on the erosion behaviour Hot Technical Study of DELTA Plasma Spraying Finely grained nanometric and submicrome IN-FLIGHT BEHAVIOUR OF DENSE AND HOLLOW Design and Preparation of High Quality N Fabrication of finely structured silic The Development of High Efficiency Super Microstructure and wear resistance of mo NATURE OF THE CORROSION PROBLEM The continuous increase of the turbine i RF magnetron sputtered aluminium oxide c

Home page | About us | service | Advertisement | Contact us | Map | Statement | WAP Powered by sunspraying © 2003-2012 sunspraying.com Inc. Technical support：www.hy126.net