Influence of Particle Initial Temperature on High Velocity Impact Process in Cold Spraying
Yue Li, Xiao-fang Wang, Shuo Yin, Sheng-li Xu
Procedia Environmental Sciences
abstract
In this study, coupled thermal-mechanical analysis of particle impact behavior in cold spraying was conducted for Cu
by using ABAQUS program. Some important aspects on particle initial temperature in cold spraying were examined. The results show that initial temperature of particle takes an important role in 3D simulated results. As the initial tempe-rature rising, compression ratio of the particle increases gradually, critical velocity decreases, but depth of the pit charges little. Furthermore, particle initial temperature ha s some influence on interface temperature rising and the maximum temperature did not occur at the centre point of initial impact.
keywords: Cold spraying; Numerical simulation; Initial tempe-rature; Coupled thermal-mechanical analysis
参考文献 略
本站文章未经允许不得转载;如欲转载请注明出处,北京桑尧科技开发有限公司网址:http://www.sunspraying.com/
|