Fabrication of Al/AlFe composites by plasma synthesis method
Jung-Moo Lee, Suk-Bong Kang, Tatsuo Sato, Hiroyasu Tezuka
Materials Science and Engieering
Abstract
The present work was undertaken to highlight a no vel in-situ process in which plasma spraying techniques plus electromagnetic stirring were used to produce Al/Al3Fe composites consist of angular and needle-like morphology of Al3Fe intermetallic compounds of about 10 /20 mm in size. The microstructures of fabricated materials consisted ofa-Al and Al3Fe intermetallic compounds, and
the size, volume fraction and shape of Al3Fe intermetallic compounds depended mainly on the temperatu...Morere of the melt and the plasma spraying conditions such as input current, gas flow rate of plasma and spraying distance. The microstructural difference arose from the difference of instantaneous temperature and velocity of the iron particle on the melt surface. The temperature and
velocity of the iron particles in the plasma arc were calculated and the results were compared with the fabricated microstructures. In addition, the evolution of microstructures of angular and needle-like Al3Fe intermetallic compounds was analyzed morphologically by spherical shell model incorporating of diffusion kinetics.
keywords:Fe particle; Metal Matrix Composites; Reaction; Dissolution; Plasma spraying; Al3Fe intermetallic compounds
本站文章未经允许不得转载；如欲转载请注明出处，北京桑尧科技开发有限公司网址：http://www.sunspraying.com/
|
