中文版 English
Position:首页 > Papers > Spraying material

High-pressure plasma spraying of hydroxyapatite powders

Time:2012-12-04 08:17:21  From:Materials Science  Author:V. Guipont, M. Espanol, F. Bor

High-pressure plasma spraying of hydroxyapatite powders

V. Guipont, M. Espanol, F. Borit, N. Llorca-Isern, M. Jeandin, K.A. Khor, P. Cheang
Materials Science

Abstract
Thermal spray processes with their wide array of operating parameters are flexible manufacturing tools in the production of bioactive hydroxyapatite (HA) coatings. In this study, two spherical HA powders, namely, spray-dried hydroxyapatite and spheroidized hydroxyapatite powders were sprayed with suitable parameters in a controlled atmosphere plasma spraying (CAPS)system. This unique system was operated in three distinct modes: High-pressure plasma spraying (HPPS), atmospheric pl...Moreasma spraying (APS) and inert plasma spraying. The HPPS mode has three different pressure settings up to 250 kPa. The APS mode is operated at normal atmospheric pressure of 100 kPa (sea level), and, the other modes utilised argon gas to provide the inert atmosphere during plasma spray. These were applied in order to assess the influence of chamber pressure and chamber atmosphere on the deposition of HA coatings. The microstructures and phase compositions of the plasma sprayed HA coatings are evaluated using standard X-ray diffraction (XRD) and electron microscopy techniques. These established the influence of the
plasma spray parameters in the CAPS chamber. HPPS led to enhanced heating of the powder and dense HA coatings with a high content of the amorphous calcium phosphate phase. Small amounts of other calcium phosphates, tetracalcium phosphate and tricalcium phosphate were detected. Calcium oxide was not detected. Such coatings are useful for subsequent investigation of biological and mechanical properties where phase composition and porosity are deciding factors. It is found that the degree of
melting of the HA powder can be controlled with CAPS system. This has the advantage of tailoring the final coating microstructure.

keywords:Hydroxyapatite; Biomedical applications; Plasma-sprayed coating; Controlled atmosphere plasma spraying; High-pressure plasma spraying

本站文章未经允许不得转载;如欲转载请注明出处,北京桑尧科技开发有限公司网址:http://www.sunspraying.com/

Support
返回首页
Home page
发表评论 共有条评论
用户名: 密码:
验证码: 匿名发表
Information
Article
    无相关信息
Update
Hot