Sliding Wear Properties of HVOF Thermally Sprayed Nylon-11 and Nylon-11/Ceramic Composites on Steel
L. Jackson,M. Ivosevic,R. Knight,R. A. Cairncross
abstract:Polymer and polymer/ceramic composite coatings were produced by ball-milling 60 m Nylon- 11 together with nominal 10 vol.% of nano and multi-scale ceramic reinforcements and HVOF spraying these composite feedstocks onto steel substrates to produce semi-crystalline micron and nano-scale reinforced coatings polymer matrix composites. Room temperature dry sliding wear performance of pure Nylon-11, Nylon-11 reinforced with 7 nm silica, and multi-scale Nylon- 11/silica composite coatings incorporating 7-40 nm and 10 m ceramic particles was characterized using a pin-on-disk tribometer. Coefficient of friction and wear rate were determined as a function of applied load and coating composition. Surface profilometry and scanning electron microscopy were used to characterize and analyze the coatings and wear scars. The pure Nylon-11 coating experienced less wear than the composites due to the occurrence of two additional wear mechanisms: abrasive and fatigue wear.
keywords:HVOF spraying of polymers, wear resistance, sliding wear, Nylon-11
本站文章未经允许不得转载；如欲转载请注明出处，北京桑尧科技开发有限公司网址：http://www.sunspraying.com/
|
