Coating Stresses in Thermal Barrier Coatings by an In-Situ Curvature Monitoring Technique
Masayuki ARAI
Journal of Solid Mechanics and Materials Engineering
abstract：In this paper, coating stresses in thermal barrier coating (TBC) changing with cyclic heating - cooling are measured with a curvature measurement device developed in this study. The coating system chosen in this study is a dual-layered structure, and it consists of a partially stabilized zirconia (PSZ) as the ceramic coating layer and CoNiCrAlY as the metal-bond coating layer. The specimen used here is a strip-plate shape with thin thickness (600 m) extracted chemically from carbon steel coated by a thermal spraying process. A cyclic heating-cooling test and a cyclic heating-cooling test with a dwelling time at the maximum temperature are conducted for the strip-plate specimen. Deflection and coating stresses are measured continuously under these cyclic tests, and thermal deformation mechanisms generating the deflection and coating stresses are discussed based on primitive knowledge using an elementary beam theory.
keywords:Ceramic Thermal Barrier Coating; Thermal cycling; Coating Stress; Curvature Monitoring
本站文章未经允许不得转载；如欲转载请注明出处，北京桑尧科技开发有限公司网址：http://www.sunspraying.com/
|
