中文版 English
Position:首页 > Technology  > Spraying equipment

The way to fabricate HfC

Time:2019-08-05 18:25:43  From:  Author:

 CVD has been applied to fabricate HfC single-phase coating and HfC-based composite coating . While, the deposition process is usually time-consuming and high-cost. SAPS technology is characterized by high deposition rate and low cost, which has been widely applied to synthesize coatings. During SAPS process, the temperature of plasma arc is very high (above 10,000 °C) and the velocity of spraying particle is supersonic . The composition, microstructure and thickness of the coatings could be designed by adjusting the spraying parameters. So, SAPS is a promising method to prepare refractory metal carbides coatings.

11-21-42-65-12.jpg


本文由桑尧热喷涂网收集整理。本站文章未经允许不得转载;如欲转载请注明出处,北京桑尧科技开发有限公司网址:http://www.sunspraying.com/

Support
返回首页
Home page
发表评论 共有条评论
用户名: 密码:
验证码: 匿名发表
Information
Article
    无相关信息
Update
Hot